Pay in installments of $293.75 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Retrax 17-18 Super Duty F-250-450 Long Bed RetraxPRO XRBoost your pickups cargo convenience, security, and flexibility with the RealTruck RetraxPRO XR manual retractable tonneau cover. With over one million units sold worldwide, the RetraxPRO XR combines sleek, low profile aesthetics, smooth manual operation, and built in rack compatibility into one premium truck bed cover. Integrated T slot rails run the full length of the cover, making mounting accessories a breeze. The rack ready tonneau cover
Boost your pickup’s cargo convenience, security, and flexibility with the RealTruck® RetraxPRO XR manual retractable tonneau cover. With over one million units sold worldwide, the RetraxPRO XR combines sleek, low-profile aesthetics, smooth manual operation, and built-in rack compatibility into one premium truck bed cover. Integrated T-slot rails run the full length of the cover, making mounting accessories a breeze. The rack-ready tonneau cover effortlessly accepts racks, cargo holders, tents, and cross bars, allowing you to expand your truck’s hauling capacity without sacrificing bed access. The RetraxPRO XR features durable double-wall aluminum slat construction, delivering exceptional strength and security while supporting up to 500 lbs. of evenly distributed cargo. A premium matte black powder coat finish offers an OE-inspired appearance that resists scratches, UV exposure, and routine abuse. Opening and closing the cover is smooth and refined thanks to RealTruck’s exclusive CoreTrax™ sealed rollers and TraxLatch™ premium-feel handle. The TraxLatch system allows the cover to lock in unlimited positions, giving you infinitely flexible cargo control—you can even cinch gear between the cover and tailgate. For added security, the key-lockable TraxLatch handle helps to deter thieves. The RetraxPRO XR is proven for extremes, tested in conditions from -40°F to 180°F and up to 95-percent humidity. An all-new water management system seals tightly against the bed rails and drains excess water through integrated tubes, keeping cargo protected and dry. A reinforced storage case with fortified ends adds durability and long-term reliability. This cover opens with the tailgate opened or closed, allowing both to function independently in any order. Installation is simple and efficient, with a redesigned package that ships in a single box for easy handling. Retrax in a RealTruck brand. We back each order with the confidence of a limited lifetime warranty.This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2026 | Ford | F-250 Super Duty | King Ranch |
| 2017-2026 | Ford | F-250 Super Duty | Lariat |
| 2018-2024 | Ford | F-250 Super Duty | Limited |
| 2017-2026 | Ford | F-250 Super Duty | Platinum |
| 2017-2026 | Ford | F-250 Super Duty | XL |
| 2017-2026 | Ford | F-250 Super Duty | XLT |
| 2017-2026 | Ford | F-350 Super Duty | King Ranch |
| 2017-2026 | Ford | F-350 Super Duty | Lariat |
| 2018-2024 | Ford | F-350 Super Duty | Limited |
| 2017-2026 | Ford | F-350 Super Duty | Platinum |
| 2017-2026 | Ford | F-350 Super Duty | XL |
| 2017-2026 | Ford | F-350 Super Duty | XLT |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Love it it was perfect for what I needed it for. Good quality!
Size: 4 Panel, Color: Black
It like a very dark chocolate brown/black. What I liked most about it is that you just pull it out of the box take the long plastic film off of it and it's ready to go. It has protective feet on the bottom. It's very attractive and it was so easy. It's so nice when you have a product you don't have to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 13, 2026
★★★★★ 5
Good quality. Nice design
Size: 4 Panel, Color: Chocolate Brown
Love it. Beautiful and good material. Just a little bit too high for my room.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
★★★★★ 4
Shipped quickly and as described
It was what I expected as functionality, lightweight and easy to move about. I plan to use it in my enclosed patio to obscure weight bench and wts. My only complaint is that the bamboo cover on one edge is not secure. But I will probably use a magic marker to cover the natural back that is showing. I don’t have time to return it as my event is coming soon.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 3, 2025
★★★★★ 5
Good product, needs double hinges for versatility.
Size: 6 Panel, Color: Brown
Blocks out all the light, looks good, good color. Only con is that it is not double hinged so it is hard to position the extra panels because I bout 6 panels instead of the 4 I usually get. Good deal, very decent price with the free delivery. Very clean packaging, came in great shape, no smell or odor from the factory.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 9, 2025
recommand products
Teenage Engineering OP-1 Strap Kit - Black
49.00
*B Grade* Hunt For a Killer: Death at the Dive Bar
13.09
Bokhara 12' 1" X 18' 11" Hand Knotted Wool Rug
2290.00
Mamluk 4' 11" X 6' 9" Hand Knotted Wool Rug
1165.00
1 pair Heavy Duty 14 foot Aluminum Loading Ramps 15" x 168" 4K Capacity Per Ramp
599.98